Available Pin Counts : 5P
Type : Male
Installation method : Screw type
Direction : 90°
Applications : Power, Signal Transmission
90-degree rubberized molding type;
Process features: This adopts an integrated molding and rubber coating process, where the metal core components and the weather-resistant rubber compound are molded together through a mold in one step. This process enables a close bond between the rubber coating layer and the internal metal structure, enhancing the overall mechanical strength and effectively protecting the internal electrical connection parts. Space saving: The 90-degree bending angle can precisely change the cable direction, allowing the cables to be orderly arranged in a vertical or horizontal direction, suitable for spaces with limited space and complex wiring in control cabinets, equipment interiors, etc., which can save wiring space and time. Good protection performance: The rubberized molding process can achieve a good sealing effect, usually having IP67 level waterproof and dustproof performance, effectively preventing water, dust, oil, etc. from invading, and reducing the occurrence of short circuits, poor contact, etc.
|
Product model
|
Core
|
Rated current
|
Rated voltage
|
Wire gauge / Dimension
|
|||
|
A/C
|
D/C
|
AWG
|
mm²
|
||||
|
MC08BM-055LSRAXXXXX01
|
5
|
3A
|
60V
|
60V
|
24
|
0.25
|
|
| Core | 3A | 4A | 6A |
| male end |
|
|
|
| 8A | 5B | 4D | |
|
|
|
|
|
| Core | 3A | 4A | 6A |
| female connector |
|
|
|
| 8A | 5B | 4D | |
|
|
|
|
The connector must not be plugged or unplugged under load. Failure to follow the instructions and improper use can result in personal injury.
The development of the connector is aimed at being applied in factory engineering, control and electrical equipment construction. Users are responsible for checking whether the connector can also be used in other applications.
Connectors used in circuits with dangerous voltages that cause electric shock must be installed and used only by personnel who have received training in electrical engineering, or under their supervision, while taking into account the applicable regulations and standards.
Users must take appropriate security measures to ensure that the connectors do not accidentally disconnect.
When installing, apply moderate force and use the special tool to tighten the nuts. Avoid excessive force to prevent the shell from deforming or the pins from bending. Ensure that the plug and socket are fully engaged. Do not power on the device when not locked in place to prevent arc discharge due to poor contact.
The plug connectors with an enclosure protection rating of IP67 and IP68 are not suitable for use in water. When used outdoors, the plug connectors must be protected against corrosion separately. For further information on IP protection ratings, please refer to "Technical Information".
telephone
Contact US