Available Pin Counts : 5P
Type : Female
Direction : 180°
Applications : Power, Signal Transmission
Vertical rubber-molded precast cable:
Protection level: Usually has an IP67 protection level, capable of effectively preventing dust and water, and can be used in harsh environments. Temperature range: Constant temperature range is -40℃ to 85℃. High durability: Nickel-plated brass ensures the stability and durability of the connection. Application fields: Widely used in industrial automation, industrial machinery, robots, semiconductor manufacturing, process control systems, etc., for connecting sensors, actuators, controllers and other equipment. Strong connection strength: Compared to crimping methods, welding can form a stable metallurgical bond between the wire and the contact point, with lower contact resistance and less tendency to fall off. In harsh working conditions such as vibration and impact, it can maintain stable electrical connection, suitable for high-frequency motion equipment like robots and conveyor lines. Installation and customization flexibility: Welding and rubber molding have been completed before leaving the factory. On-site, only thread locking is needed to complete the installation, without additional welding operations; cable length, core wire color can be customized, and there are also various options for the number of cores, to meet the wiring requirements of different sensors and actuators.
|
Product model
|
Core
|
Rated current
|
Rated voltage
|
Wire gauge / Dimension
|
|||
|
A/C
|
D/C
|
AWG
|
mm²
|
||||
|
MC08BF-055LSSTXXXXX01
|
5
|
3A
|
60V
|
60V
|
24
|
0.25
|
|
| Core | 3A | 4A | 6A |
| male end |
|
|
|
| 8A | 5B | 4D | |
|
|
|
|
|
| Core | 3A | 4A | 6A |
| female connector |
|
|
|
| 8A | 5B | 4D | |
|
|
|
|
The connector must not be plugged or unplugged under load. Failure to follow the instructions and improper use can result in personal injury.
The development of the connector is aimed at being applied in factory engineering, control and electrical equipment construction. Users are responsible for checking whether the connector can also be used in other applications.
Connectors used in circuits with dangerous voltages that cause electric shock must be installed and used only by personnel who have received training in electrical engineering, or under their supervision, while taking into account the applicable regulations and standards.
Users must take appropriate security measures to ensure that the connectors do not accidentally disconnect.
When installing, apply moderate force and use the special tool to tighten the nuts. Avoid excessive force to prevent the shell from deforming or the pins from bending. Ensure that the plug and socket are fully engaged. Do not power on the device when not locked in place to prevent arc discharge due to poor contact.
The plug connectors with an enclosure protection rating of IP67 and IP68 are not suitable for use in water. When used outdoors, the plug connectors must be protected against corrosion separately. For further information on IP protection ratings, please refer to "Technical Information".
telephone
Contact US