Available Pin Counts : 5P
Type : Male
Installation method : Screw type
Direction : 180°
Applications : Power, Signal Transmission
Straight plastic assembly screw type:
Design and assembly: Adopting a 180° straight design, it can meet the installation requirements of linear wiring in equipment, reducing space occupation; the shell is made of PA9T material, which combines lightweight with structural strength, and the plastic assembly process is simple, facilitating on-site assembly and later maintenance. Coding and locking: The B coding design can precisely avoid incorrect insertion with other M8 connectors, ensuring connection accuracy; the connection method uses screw locking, combined with a threaded locking mechanism. During installation, it is fixed by screws, effectively resisting vibration and impact, and preventing connection loosening. It is suitable for scenarios in industrial automation that require convenient wiring and frequent maintenance, such as connecting various sensors and actuators for pressure, temperature, etc., and adapting to PLC control systems, machine tools, intelligent storage equipment, etc.
|
Product model
|
Core
|
Rated current
|
Rated voltage
|
Wire gauge / Dimension
|
|||
|
A/C
|
D/C
|
AWG
|
mm²
|
||||
|
MC08BM-05N4LJZSS1401
|
5
|
3A
|
60V
|
60V
|
24
|
0.25
|
|
| Core | 3A | 4A | 6A |
| male end |
|
|
|
| 8A | 5B | 4D | |
|
|
|
|
|
| Core | 3A | 4A | 6A |
| female connector |
|
|
|
| 8A | 5B | 4D | |
|
|
|
|
The connector must not be plugged or unplugged under load. Failure to follow the instructions and improper use can result in personal injury.
The development of the connector is aimed at being applied in factory engineering, control and electrical equipment construction. Users are responsible for checking whether the connector can also be used in other applications.
Connectors used in circuits with dangerous voltages that cause electric shock must be installed and used only by personnel who have received training in electrical engineering, or under their supervision, while taking into account the applicable regulations and standards.
Users must take appropriate security measures to ensure that the connectors do not accidentally disconnect.
When installing, apply moderate force and use the special tool to tighten the nuts. Avoid excessive force to prevent the shell from deforming or the pins from bending. Ensure that the plug and socket are fully engaged. Do not power on the device when not locked in place to prevent arc discharge due to poor contact.
The plug connectors with an enclosure protection rating of IP67 and IP68 are not suitable for use in water. When used outdoors, the plug connectors must be protected against corrosion separately. For further information on IP protection ratings, please refer to "Technical Information".
telephone
Contact US