Available Pin Count : 5P
Type : Female
Mounting Method : Solder Type
Applications : Power, Signal
M8 B coding board-mounted soldered-line connector: Error prevention and compatibility: B coding mechanical key positions, preventing A/D coding mix-in; perfectly compatible with IO-Link master/slave stations, compatible with mainstream brands' products of the same specification.
Dual reliability of soldering + board surface: Soldering terminal connection (22–26 AWG) provides stable electrical connection; M8×1 threaded locking, panel hole φ8mm, front/back locking options, shock-resistant and anti-loosening. Industrial-grade protection: Coupled with IP67, dustproof and waterproof; -40℃ to +85℃ wide temperature range, oil-resistant and chemically corrosion-resistant, suitable for outdoor and production line sites. Low loss and long life: Gold-plated contacts, contact resistance ≤ 5mΩ; insertion and removal ≥ 500 times, meeting long-term stable operation requirements.
|
Product model
|
Core
|
Rated current
|
Rated voltage
|
Wire gauge / Dimension
|
|||
|
A/C
|
D/C
|
AWG
|
mm²
|
||||
|
MC08BF-05R2LSLNS1601
|
5
|
3A
|
60V
|
60V
|
24
|
0.25
|
|
| Core | 3A | 4A | 6A |
| Male |
|
|
|
| 8A | 5B | 4D | |
|
|
|
|
|
| Core | 3A | 4A | 6A |
| Female |
|
|
|
| 8A | 5B | 4D | |
|
|
|
|
The connector must not be plugged or unplugged under load. Failure to follow the instructions and improper use can result in personal injury.
The development of the connector is aimed at being applied in factory engineering, control and electrical equipment construction. Users are responsible for checking whether the connector can also be used in other applications.
Connectors used in circuits with dangerous voltages that cause electric shock must be installed and used only by personnel who have received training in electrical engineering, or under their supervision, while taking into account the applicable regulations and standards.
Users must take appropriate security measures to ensure that the connectors do not accidentally disconnect.
When installing, apply moderate force and use the special tool to tighten the nuts. Avoid excessive force to prevent the shell from deforming or the pins from bending. Ensure that the plug and socket are fully engaged. Do not power on the device when not locked in place to prevent arc discharge due to poor contact.
The plug connectors with an enclosure protection rating of IP67 and IP68 are not suitable for use in water. When used outdoors, the plug connectors must be protected against corrosion separately. For further information on IP protection ratings, please refer to "Technical Information".
telephone
Contact US