Panel Mounting

1. Insert the connector housing into the equipment panel hole (matching M5 size).
2. Tighten the fixing nut with even force to secure the connector.
3. Ensure the threads are fully tightened without loosening to maintain structural stability.

PCB Soldering

1. Insert the connector pins into the corresponding PCB pad holes accurately.
2. Solder the pins to the pads using a soldering gun (temperature recommended: 260±5℃).
3. Check that solder joints are firm, smooth and free of cold solder or short circuits.

Cable Crimping

1. Strip the wire insulation (0.1-0.5mm² recommended) and insert into the crimp terminal.
2. Use a dedicated crimping plier to crimp the terminal with proper pressure.
3. Verify full contact between the pin and wire (contact area ≥80%) to avoid virtual connection.

Specialized tools are essential for ensuring installation accuracy and connection reliability:

• Thread Wrench : For panel mounting nut tightening, control torque to avoid thread damage.
• Soldering Gun : For PCB soldering, ensure stable temperature and uniform solder joints.
• Crimping Plier : For cable crimping, match M5 terminal size to ensure tight crimping.

Octopusconn Advantage : Matching professional installation tools are available to ensure standardized operation and optimal installation quality.