Confirm application
We use Cookies to improve your browsing experience. By continuing to use our website, you agree to our use of Cookies.
Accept

7/8"-16 UN Thread Specification

  • Thread Type : Unified National (UN) inch thread, 7/8"-16 UN represents 7/8 inch nominal diameter with 16 threads per inch, not the outer diameter of the connector .
  • Key Distinction : The 7/8" value in the thread specification refers to the nominal size of the thread, not the outer diameter dimension of the 7/8" connector itself.

Panel Opening & Installation Parameters

Standard Panel Opening Size

Nominal Opening :
• Recommended diameter: 22mm (±0.2mm)
• Tolerance range: 21.8mm ~ 22.2mm

Installation Note :
• The opening size is matched to the connector's mounting base
• Ensure no burrs after opening to avoid seal damage

Inch Thread Technical Details

7/8"-16 UN Parameters :
• Thread pitch: 1.5875mm (1/16 inch)
• Major diameter: ~22.225mm
• Minor diameter: ~20.637mm

Application Scope :
• Complies with Mini-Change standard connectors
• Mainly used for industrial circular connector mating

Technical Tip: When processing the panel opening for 7/8"-16 UN connectors, prioritize using a 22mm reamer to ensure dimensional accuracy. The 7/8" thread specification is an industry standard for this type of connector, and it is critical to distinguish between thread nominal size and connector outer diameter to avoid installation mismatches.

Latest Recommend

telephone Contact US